IT Essentials (ITE v6.0) Chapter 7 Exam Answers 100% 2016

  1. How many devices can a Bluetooth device connect to simultaneously?
    • 127
    • 7
    • 10
    • 24
    • 5
  2. A device has an IPv6 address of 2001:0DB8:75a3:0214:0607:1234:aa10:ba01 /64. What is the host identifier of the device?
    • 2001:0DB8:75a3
    • 0607:1234:aa10:ba01
    • 2001:0DB8
    • ba01
  3. Which layer of the OSI model is responsible for logical addressing and routing?
    • application
    • data link
    • network
    • transport
  4. When would a printer be considered a network host?
    • when it is connected to a switch
    • when it is connected to a workstation
    • when it is connected to a laptop
    • when it is connected to a PC
  5. Which device provides wireless connectivity to users as its primary function?
    • switch
    • router
    • access point
    • modem
  6. Which technology is most often used to connect devices to a PAN?
    • coaxial cabling
    • Bluetooth
    • fiber optic cabling
    • IEEE 802.11n wireless
  7. Which three factors are reasons for a company to choose a client/server model for a network instead of peer-to-peer? (Choose three.)
    • The network is small with fewer than eight users.
    • The company network requires secure access to confidential information.
    • The users need a central database to store inventory and sales information.
    • Each user understands how to safely share files across a network.
    • The data gathered by the employees is critical and should be backed up on a regular basis.
    • All employees passed a strict background check as part of the corporate hiring practices.
  8. What is a characteristic of a WAN?
    • It connects multiple networks that are geographically separated.
    • It spans across a campus or city to enable sharing of regional resources.
    • It is typically owned and managed by a single home or business.
    • It requires a wireless access point to connect users to the network.
  9. Which three layers of the OSI model map to the application layer of the TCP/IP model? (Choose three.)
    • application
    • presentation
    • session
    • transport
    • network
    • data link
    • physical
  10. What is the correct order of the layers of the TCP/IP model from the top layer to the bottom?
    • application, session, network, data link, physical
    • application, internet, network access, transport
    • network access, transport, internet, application
    • application, transport, internet, network access
  11. What TCP/IP model layer is responsible for MAC addressing?
    • network access
    • internet
    • transport
    • application
  12. What PDU is associated with the network layer of the OSI model?
    • data
    • frame
    • packet
    • segment
  13. Which two layers of the OSI model correspond to the functions of the TCP/IP model network access layer? (Choose two.)
    • physical
    • data link
    • network
    • transport
    • session
  14. What is identified by the 100 in the 100BASE-TX standard?
    • the maximum bandwidth in Mb/s
    • the maximum cable distance in meters
    • the maximum number of network nodes
    • the series number of the standard
  15. Which two characteristics describe Ethernet technology? (Choose two.)
    • It is supported by IEEE 802.3 standards.
    • It is supported by IEEE 802.5 standards.
    • It typically uses an average of 16 Mb/s for data transfer rates.
    • It uses the CSMA/CD access control method.
    • It uses a ring topology.
  16. Which IEEE standard operates at wireless frequencies in both the 5 GHz and 2.4 GHz ranges?
    • 802.11n
    • 802.11g
    • 802.11b
    • 802.11a
  17. A customer is considering a multipurpose device to create a home network. Which three devices are usually integrated into a multipurpose network device? (Choose three.)
    • web server
    • switch
    • router
    • email server
    • wireless access point
    • print server
  18. Which network device makes forwarding decisions based on the destination MAC address that is contained in the frame?
    • repeater
    • hub
    • switch
    • router
  19. A router uses IP addresses to forward traffic from one network to other networks.
  20. A network specialist has been hired to install a network in a company that assembles airplane engines. Because of the nature of the business, the area is highly affected by electromagnetic interference. Which type of network media should be recommended so that the data communication will not be affected by EMI?
    • STP
    • coaxial
    • fiber optic
    • UTP
  21. Which term describes a type of coaxial cable?
    • RG-6
    • 568A
    • UTP
    • Cat 5e
  22. Which pairs of wires change termination order between the 568A and 568B standards?
    • green and orange
    • green and brown
    • blue and brown
    • brown and orange
  23. Which two types of signal interference are reduced more by STP than by UTP? (Choose two.)
    • RFI
    • white noise
    • MDF
    • dispersion
    • EMI
  24. How many host addresses are available on a network with a subnet mask of 255.255.0.0?
    • 65,534
    • 254
    • 16,777,214
    • 1024
  25. A technician is troubleshooting a problem where the user claims access to the Internet is not working, but there was access to the Internet the day before. Upon investigation, the technician determines that the user cannot access the network printer in the office either. The network printer is on the same network as the computer. The computer has 169.254.100.88 assigned as an IP address. What is the most likely problem?
    • The computer cannot communicate with a DHCP server.
    • The IP default gateway on the computer is incorrect.
    • The network interface card driver needs to be updated.
    • The router that connects this network to other networks is down.
  26. What is a characteristic of the UDP protocol?
    • low overhead
    • guaranteed delivery
    • error correction
    • end-to-end establishment before delivery

Comments

Post a Comment

Popular posts from this blog

IT Essentials (ITE v6.0) Chapter 2 Exam Answers 100% 2016

Image
A new technician has joined the IT team and is about to service a heavy printer. What advice would you give this technician to avoid any injury when transporting the heavy printer to the service area? Bend your knees to use the strength in your legs to lift the printer. Avoid bending your knees when lifting the printer. Bend your back to pick the printer up. Use your arms and back to lift the printer. How does an inline UPS protect computer equipment against electrical power brownouts and blackouts? by grounding excess electrical voltage by using a battery to supply a constant level of voltage by switching from main power to a standby power source by stopping the flow of voltage to the computer Which circumstance increases the likelihood of ESD damage to a computer? working in low levels of humidity using a magnetic screwdriver while working on a hard drive plugging a printer into an UPS self grounding against the computer case Which condition refers to a
Read more

IT Essentials (ITE v6.0) Chapter 3 Exam Answers 100% 2016

When a computer is being assembled, which action can be taken to help eliminate cable clutter within a computer case? Install a CPU without using a heat sink and fan assembly. Install a 2.5in HDD instead of a 3.5in HDD. Install a modular power supply. Install a motherboard without using standoffs in the case. What is the best way to apply thermal compound when reseating a CPU? Clean the CPU and the base of the heat sink with isopropyl alcohol before applying the thermal compound. Use rubbing alcohol to clean the base of the heat sink before applying thermal compound. Scrape off the old thermal compound on the heat sink with a sharp knife and apply the thermal compound liberally. Put a thick layer of thermal compound over the existing thermal compound before reseating the CPU. Change the base of the heat sink before applying the thermal compound. A technician is installing additional memory in a computer. How can the technician guarantee that the memory is correctly aligned
Read more

IT Essentials (ITE v6.0) Chapter 8 Exam Answers

Image
A user notices that the data transfer rate for the gigabit NIC in the user computer is much slower than expected. What is a possible cause for the problem? The NIC duplex settings have somehow been set to half-duplex. The NIC wake-on-LAN setting is misconfigured. Hibernation mode is causing the NIC to shutdown unexpectedly. The NIC is configured to use both IPv4 and IPv6 at the same time. Two LEDs are usually present on a NIC. What are the two primary uses for these LEDs? (Choose two.) to indicate the presence of a connection to indicate interference from another nearby wireless or electronic device to indicate that the NIC has connected to a DHCP server to indicate that the NIC is connected to a homegroup or workgroup to indicate that data transfer activity is present What is the purpose of the network profiles that are used to establish a new network connection on a Windows PC? to configure NIC settings for the fastest network available to remove the need for I
Read more